Pioneer XR-VS100D - 2 Connecting Up; Understanding the Rear Panel; Connecting the Speakers

2 Connecting Up
9
En
English
AUX IN
L
R
OPTICAL
DIGITAL
OUT
TV
SYSTEM
NTSC
PAL
VIDEO
OUT
S-VIDEO
OUT
REC OUT
L
R
R
L
+
+
-
-
ANTENNA
AM
LOOP
ANTENNA
FM
UNBAL
75Ω
AC INLET
AUTO
Plug in an external
audio source here
Connect an external AV amp
or digital recorder here
Connect the
AM and FM
antennas here
Connect to the
analog inputs
of an external
recorder here
Connect the
main front
speakers here
Select the TV picture
format in your region
Connect your TV and
VCR to these outputs
Connect to a
power outlet
Understanding the Rear Panel
Connecting the Speakers
Important: Before making or changing any rear panel connections, make sure
that all the components are switched off and unplugged from the power supply.
To get the best sound from the system, it’s important that you connect the two strands
of speaker wire for each speaker to the correct speaker terminal. To help you match up
the wires and terminals correctly, the supplied speaker cord is color coded: connect the
black half of the cord to the black (–) terminals, and the red half to the red (+)
terminals.
Twist the exposed wire
strands together.
Pull open the tab and
insert the twisted wire fully
into the terminal.
Snap the tab shut again to
secure the speaker cord.
Note: Make sure that the bare speaker wires cannot touch each other, or come
into contact with other metal parts once the unit is switched on.
Front speaker terminals