What to do if the Pioneer XR-A780 remote control is not working?
If the remote control for your Pioneer Receiver doesn't seem to be working, first ensure that you are using it within its operating range. If the problem persists, try replacing the batteries.
Why is the sound muffled on my Pioneer XR-A780 Receiver?
If the sound from your Pioneer Receiver is muffled, or if a previous recording is still audible underneath the new one, there are a few potential causes. First, the tape heads may be dirty, so clean them using a head-cleaning cassette or cleaning kit. Also, ensure that you’re using a Type I (normal) or Type II (high/CrO2) tape and not Type IV (metal) tapes. Finally, if the recording was made with Dolby NR switched off, check that Dolby NR is also switched off during playback.
Why does my Pioneer XR-A780 sound so bright?
If the sound from your Pioneer Receiver is unnaturally bright, ensure that Dolby NR is switched on during playback if the recording was made with Dolby NR switched on.
Why doesn't music search work on my Pioneer XR-A780 Receiver?
If the music search on your Pioneer Receiver does not work, it might be because the spaces between songs are too short. Also, make sure that the tape is playing when using music search—it will not work if the tape is stopped.
What to do if my Pioneer XR-A780 cannot record?
If you cannot record with your Pioneer Receiver, check that the cassette still has its erase-protect tabs intact, or that they are covered with self-adhesive tape.
To Next Page
General
