To Next PageTo Next Page
Need help?Do you have a question about the Pioneer XV-DV30FS and is the answer not in the manual?
General| Brand | Pioneer |
|---|---|
| Model | XV-DV30FS |
| Category | Home Theater System |
| Language | English |
Symbol alerts user to uninsulated "dangerous voltage" risk.
Do not remove cover; no user-serviceable parts inside. Refer servicing to qualified personnel.
Warning against opening the enclosure to prevent electric shock.
Symbol alerts user to important operating and maintenance instructions.
Leave space around the unit for ventilation to improve heat radiation.
Do not block ventilation openings to prevent fire hazard from overheating.
Do not place naked flame sources (like candles) on the equipment.
Unplug unit from AC outlet to shut off all power; ensure cord is accessible.
Product contains a Class 1 laser diode but with higher power; do not remove covers.
Handle power cord by plug, avoid wet hands, do not pinch or knot the cord.
Product is for general household use; commercial use may void warranty.
Operate within specified temperature and humidity ranges for optimal performance.
Avoid poorly ventilated areas, high humidity, or direct sunlight for installation.
Ensure AC plug matches outlet; replacement by qualified personnel.
Guide to arranging speakers for optimal 5.1 channel home theater sound.
Standard setup for optimal 5.1 channel surround sound.
Ideal setup when rear speaker placement is difficult or cables are long.
Common preparation steps for all speaker models before setup.
Instructions for attaching non-skid pads to speaker bases and subwoofer.
Specific preparation steps for assembling speaker stands for these models.
Specific preparation steps for assembling speaker stands for these models.
Specific preparation steps for attaching brackets for these models.
Instructions for wall-mounting speakers, including strength and screw considerations.
Specific preparation steps for assembling speaker stands for these models.
Specific preparation steps for assembling speaker stands for these models.
Specific preparation steps for attaching brackets for these models.
Instructions for wall-mounting speakers, including strength and screw considerations.
How to hang HTZ-FS30DVD/FS30DVD-AP front speakers vertically or horizontally.
Precautions for center speaker placement, wire handling, magnetic shielding, and subwoofer placement.
Diagram showing basic speaker connections for surround sound.
Disconnect power before making or changing connections.
Pioneer is not responsible for damages from faulty assembly, installation, or misuse.
Step-by-step instructions for assembling the AM loop antenna.
How to connect speaker wires to the unit, matching colors and polarity.
Specifics for connecting center speakers using a Y-cable.
Connecting the video output to the TV's video input.
Connecting the receiver's video output to the TV.
Connecting the power cord to the unit and the AC outlet.
Identification and function of front panel buttons, display, and jacks.
Explanation of the various indicators on the front panel display.
Shows status like sleep timer active or lights during playback.
Identification of remote control buttons and their functions.
Step-by-step guide for inserting batteries into the remote control.
Guidelines for remote control usage, range, and potential interference.
Select the speaker layout that matches your room and system configuration.
Optimal layout for 5.1 channel home theater sound with rear surround speakers.
Standard surround sound layout for HTZ585DVD-AP, separating center speakers.
Classic layout for Front Surround mode with front surround speakers.
Front Surround layout for HTZ585DVD-AP, similar to 3-spot.
Uses acoustic calibration to optimize speaker settings for room acoustics.
Positioning the microphone at ear height in the listening position.
Turning on the system and selecting speaker layout before starting MCACC.
Starting the MCACC calibration process and being quiet during setup.
How to navigate menus using cursor buttons and ENTER.
How to switch on the player and set the TV to the correct input.
Step-by-step instructions for loading a disc into the player.
How to start playback and navigate DVD/VCD menus.
Using the VOLUME +/- buttons to adjust the sound level.
Feature that allows resuming playback from the last stopped point.
How to navigate VCD/Super VCD PBC menus, or play without menus.
How to tune into AM and FM radio stations.
Tips for improving FM reception, such as switching to mono.
How to store up to 30 stations in three banks (A, B, C).
How to select and listen to stored radio presets.
Setting the audio input from a TV via HDMI or analog cable.
Connecting and listening to auxiliary sources like USB devices or Bluetooth adapters.
Audio functions may be restricted by sound source or HDMI setting.
Various modes for sound effects and field correction based on speaker layout.
Selecting surround sound modes for 5/4 spot speaker layouts.
Selecting Front Stage Surround Advance modes for 3/2 spot layouts.
Simplest listening mode; output mirrors source channels.
Using surround sound modes like STANDARD and MOVIE for 5/4 spot layouts.
4.1 channel surround sound for two-channel sources.
Designed for action movies with dynamic soundtracks.
Suitable for acoustic music sources.
Creates an extra wide stereo field.
Provides surround sound for TV sources.
Suitable for sports programs.
Suitable for video games.
Provides multichannel sound for stereo sources.
Adjusting Center Width, Dimension, and Panorama for DPL II Music.
Effective modes (FOCUS5.1, WIDE5.1) for 3/2 spot layouts.
Selecting listening modes (STEREO, A.L.C., PHONESUR) when using headphones.
Using EQ settings from Auto MCACC setup for optimal sound.
Restores sound quality to compressed audio by restoring sound pressure.
Makes dialogue stand out from background sounds in TV/movie soundtracks.
Adjusting bass, treble, quiet, and midnight modes.
Reduces bass/treble (Quiet) or provides surround sound at low volumes (Midnight).
Selecting bass modes (OFF, MUSIC, CINEMA, AUTO) to enhance bass.
General notes on functions applicable to various disc types, and restrictions.
Fast-scanning discs forward or backward at various speeds.
Playing DVDs, VCDs, DivX video/WMV in slow motion.
Advancing or reversing DVD discs frame-by-frame.
Starting a slideshow from JPEG files on a disc.
Using Disc Navigator to browse DVD/VCD contents for playback.
Selecting how disc content is displayed (Title, Chapter, Track, Time).
Selecting content to play by choosing a thumbnail image.
Creating and managing playlists of up to 30 files for discs.
Steps to add files to a playlist using the Disc Navigator.
Playing back created playlists, showing PGM indicator.
Removing specific files from a playlist using the CLEAR button.
Specifying start (A) and end (B) points to loop a section of a track or title.
Selecting repeat options like Title, Chapter, Disc, or Track Repeat.
Playing titles, chapters, or tracks in a random order.
Programming the playback order of titles/chapters/tracks on a disc.
Options like Playback Start, Stop, and Delete from the program menu.
Searching discs by title, chapter, track number, or time.
Switching subtitle language during playback.
Switching dialogue language or audio channels during playback.
Magnifying parts of the screen by 2x or 4x during playback.
Switching camera angles during multi-angle scenes on DVD discs.
Showing track, chapter, and title information on-screen.
Listening to audio and watching video files via the USB port.
Connecting a USB mass storage device to the front panel USB terminal.
Starting playback of files from a USB device.
Troubleshooting USB ERR messages and device incompatibility.
Recording tracks from a music CD onto a USB device.
Selecting and recording specific tracks from a music CD to a USB device.
Using a microphone to mix voice with backing tracks from various sources.
Instructions for plugging in one or two microphones into MIC jacks.
Loading a karaoke disc or using a USB device for backing tracks.
Turning Karaoke mode on/off and switching audio channels.
Adjusting MIC VOL and adding echo effects to the microphone mix.
Lowering or raising the pitch of the backing track.
Accessing surround sound settings like channel levels and speaker distances.
Setting relative channel levels from the main listening position.
Specifying the distance from listening position to each speaker.
Adjusting dynamic range for Dolby Digital/DTS soundtracks.
Specifying how dual mono Dolby Digital soundtracks should be played.
Using Pioneer exclusive audio technologies for maximized sound experience.
Adjusting video settings for picture presentation.
Adjusting the sharpness of edges in the picture (Fine, Standard, Soft).
Adjusting the overall brightness of the picture (–20 to +20).
Adjusting the contrast between light and dark (–16 to +16).
Adjusting the 'warmth' of the picture (High, Medium, Low, Off).
Adjusting the red/green balance (Green 9 to Red 9).
Adjusting the saturation of colors (–9 to +9).
Provides access to audio/video output, parental lock, and display settings.
Configuring digital audio output (Dolby Digital, DTS) for playback.
Setting TV screen aspect ratio (4:3, 16:9) for optimal picture display.
Selecting HDMI resolution (1920x1080p, 720p, etc.) for video output.
Adjusting HDMI color settings (Full range RGB, RGB, Component).
Setting audio language, subtitle language, and DVD menu language.
Accessing Parental Lock and DivX VOD settings.
Setting parental lock levels, registering, changing, or setting passwords.
Information on playing DivX VOD content, registration, and authorization.
How to display the player's DivX VOD registration code.
Information on playing DivX VOD content and rental expiration.
Disconnect power before making or changing connections.
Connecting component video output for better picture quality.
Connecting digital audio sources like TVs or MD recorders.
Connecting analog audio components like tape players.
Explanation of progressive scan video for enhanced image stability.
Player compatibility with progressive scan and HD TVs.
Connecting digital audio sources via optical or coaxial inputs.
Connecting analog audio sources using RCA pin-plug cables.
Selecting audio output source (System speakers or TV) via HDMI.
Steps to reset HDMI connection if error messages or blank screen occur.
Explanation of HDMI interface, supporting video and audio over a single cable.
Using a Bluetooth adapter for wireless music playback from devices.
Playing music wirelessly from Bluetooth-enabled devices using the adapter.
Using the system's remote control for media playback.
Step-by-step process for pairing Bluetooth devices with the adapter.
Selecting BT AUDIO input mode and connecting the Bluetooth device.
Controlling playback of music from a connected Bluetooth device.
Connecting the unit to a KURO LINK-compatible TV via HDMI for synchronized operation.
Adjusting unit settings and compatible components for KURO LINK function.
Steps to take before using synchronization features.
How the unit operates in sync with a KURO LINK-compatible TV's remote control.
Details on how volume, mute, input switching, and OSD language sync.
Procedures for canceling the synchronized amp mode.
Overview of optional system settings like dimming and key lock.
Adjusting the brightness of the text on the front panel display.
Enabling or disabling front panel buttons and controls.
Adjusting AM frequency step for country/region tuning.
Setting TV system to AUTO, PAL, or NTSC for picture compatibility.
Overview of compatible disc types and formats.
Information on playing DualDisc content, noting limitations.
Explanation of the DivX digital video format.
Information on playing DivX video files, including file extensions and compatibility.
Explanation of Windows Media Video (WMV) format and player compatibility.
Explanation of MPEG-4 AAC audio compression technology.
Explanation of DVD region codes and compatibility.
Guidelines for installing the system in a suitable location and environment.
What to do if condensation forms inside the player.
Steps to take when moving the main unit, including unplugging.
Explains different screen aspect ratios (4:3, 16:9) and disc formats.
Recommended TV Screen settings for widescreen TVs.
Recommended TV Screen settings for standard TVs.
Common issues like power not turning on or sudden shutoff.
Solutions for when no sound is produced after selecting a function.
Checking speaker levels, modes, and connections for surround sound.
Solutions for remote control issues like battery replacement or obstructions.
Checking microphone connection and MIC VOL settings.
Addressing feedback noise from the microphone.
How to resolve the TRAYLOCK error and eject the disc tray.
Ensuring correct digital audio out settings for DTS/Dolby indicators.
Solutions for discs ejecting automatically after loading.
Steps to take when playback is not possible.
Resolving issues where picture freezes and buttons become unresponsive.
What happens when power is cut and settings are canceled.
Checking connections and TV settings for picture issues.
Correcting screen aspect ratio settings if they are incorrect.
Issues related to copy protection technology affecting playback via VCR/AV selector.
Dealing with picture disturbances due to copy prevention or disc content differences.
Explaining volume differences between DVD and CD due to recording methods.
Ensuring CD-ROMs use ISO 9660 format for recognition.
Ensuring DVD-ROMs use UDF bridge format for recognition.
Checking file extensions and permissions for USB files.
Addressing issues with WMA/MPEG-4 AAC playback, possibly due to DRM.
Issues with WMV files, possibly related to bit rate.
Checking antenna connections and reducing interference for radio broadcasts.
Addressing issues where auto tuning fails to find stations.
Ensuring USB device format is FAT16/FAT32 and not using internal hubs.
Checking file extensions and permissions for USB files.
Resolving issues with WMA/MPEG-4 AAC playback, possibly due to DRM.
Verifying HDMI input selection, cable connection, and component compatibility.
Adjusting HDMI color settings or TV input settings for incorrect colors.
Checking direct HDMI connection and consulting manuals if issues persist.
Ensuring no interference, proper distance, correct adapter connection, and pairing.
How to select preferred languages using code letters or numbers.
A list of countries/areas and their corresponding codes.
RMS power output, impedance, and frequency range for amplifier.
Type of disc systems supported by the player.
Frequency range and antenna specifications for the FM tuner.
Frequency range and antenna specifications for the AM tuner.
Power requirements, consumption, dimensions, and weight.
List of accessories included with the DVD/CD receiver.
Specifications for S-DV585 front/surround, center, and subwoofer speakers.
Specifications for S-DV787T front/surround, center, and subwoofer speakers.
