EasyManua.ls Logo

Pipeline box - User Manual

Default Icon
35 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Gebrauchsinformation - Instruction for use
Notice d’utilisation - Istruzioni per l’uso
DNA60
Question and Answer IconNeed help?

Do you have a question about the Pipeline box and is the answer not in the manual?

Summary

Technical Data

Input Voltage Range

Specifies the voltage range for Li-ION batteries used with the device.

Input Current Specifications

Defines the input current range for Li-ION batteries, including max pulse.

Max USB-C Input Current

Indicates the maximum current the device accepts via USB-C charging.

Standby Current Consumption

Details the low current consumption when the device is in standby mode.

Output Voltage Range

Specifies the adjustable output voltage range for powering atomizers.

Output Power Range

Defines the adjustable output power range in watts.

Coil Resistance Range

Indicates the acceptable resistance range for atomizers/coils.

Operating Temperature Range

Specifies the operating temperature range for temperature control modes.

Maximum Atomizer Diameter

States the maximum diameter of an atomizer that can fit on the device.

Description

Getting Started

Open Battery Compartment

Instructions for opening the battery compartment by unscrewing the cap.

Insert Battery Correctly

Guidance on inserting a charged battery correctly, noting pole alignment and battery type.

Close Battery Compartment

Steps for closing the battery compartment, mentioning battery sleeves for different sizes.

Attach Compatible Atomizer

Procedure for connecting a compatible and functional 510 atomizer to the device.

Device Ready for Operation

Confirms the device is ready for use and points to further manual information.

Instruction Manual

Chipset and EScribe Software

Details the Evolv DNA 60 chipset and the personalization capabilities of EScribe software.

Power On;Off Procedure

Explains how the device powers on automatically and recommendations for extended non-use.

Standby Mode Operation

Describes how the device enters standby mode to conserve battery life.

Locking Device Buttons

Instructions to lock and unlock the device's buttons to prevent accidental presses.

Locking Navigation Buttons

How to lock navigation buttons to prevent unintended changes to settings.

Stealth Mode Activation

Procedure to activate and deactivate Stealth Mode for a permanently deactivated display.

Changing Application Profiles

Guide on switching between the 8 pre-configured application profiles.

Power Mode (Wattage)

Operating the device in power control mode using watts, with TC deactivated.

Power Mode (Boost)

Operating in power mode with an option to increase initial power output for the first second.

Temperature Control Modes

Overview of temperature-controlled profiles for various wire types like NiFe30, SS316L, etc.

Locking Coil Resistance

Procedure to lock the resistance of a new atomizer/coil for temperature control.

Adjusting Power Output

How to increase or decrease the power [W] in wattage or temperature control modes.

Adjusting Temperature Setting

Method to change the set temperature [F/C] in temperature-controlled operating modes.

Changing Temperature Units

How to switch the displayed temperature unit between Fahrenheit and Celsius.

Puff Time Limit Function

Explains the automatic power interruption for presses exceeding 20 seconds.

Reverse Polarity Protection

Details the device's protection against damage from incorrect battery insertion.

Battery Charging Guidelines

Information on charging the inserted Li-ION battery via the USB-C port and recommended practices.

Error Messages

Check Atomizer Error

Troubleshooting for the 'Check Atomizer' error, related to resistance detection.

Shorted Circuit Error

Guidance for the 'Shorted' error, indicating a short circuit in the attached atomizer.

Weak Battery Error

Explanation for the 'Weak Battery' error, indicating low battery voltage under load.

Resistance Range Errors

Troubleshooting for 'Ohms Too Low / Ohms Too High' errors outside the allowable resistance range.

Check Battery Error

Troubleshooting for 'Check Battery' error, related to implausible internal battery resistance.

Overheating Shutdown

Explanation for the 'Too Hot' error, indicating the device has entered safety shutdown due to high temperature.

Instructions for Use and Safety

General Information

Basic rules regarding sale, transfer, and use of e-cigarettes, prohibiting use by minors.

Handling Lithium-Ion Cells

Essential safety guidelines for handling Li-Ion batteries, including storage and charging.

Use and Storage Guidelines

Recommendations for safe use, storage, and maintenance of the e-cigarette and e-liquids.

Health Contraindications

Notes on contraindications, special warnings for vulnerable groups, and addictive properties of nicotine.

Consumer Group Warnings

Specific warnings for vulnerable consumer groups, including minors, non-smokers, pregnant, and nursing individuals.

Possible Health Effects

Information regarding potential health effects and addictive properties of nicotine in e-liquids.

Toxicological Data

Data concerning the substances contained within the device and e-liquids, with a focus on nicotine.

CE Conformity Declaration

Statement declaring the device's compliance with relevant EU directives for safety and electromagnetic compatibility.

Product Disposal Information

Guidelines for the proper disposal and recycling of e-cigarettes and batteries to minimize environmental impact.

Contact Information

Details for contacting PIPELINE GmbH, including address, telephone number, email, and website.

Pipeline box Specifications

General IconGeneral
BrandPipeline
Modelbox
CategoryElectronic Cigarettes
LanguageEnglish

Related product manuals