ALPHA Trainer www.pipistrel-aircraft.com
REV. 0
POH-162-00-40-050
Technical brief
DIMENSIONS ALPHA Trainer
Wing span 34’ 6’’ (10.5 m)
Length 21’ 4’’ (6.5 m)
Height 6’’ 9’ (2.05 m)
Wing surface 102.4 sqft (9.51 m
2
)
Vertical fin surface 11.8 sqft (1.1 m
2
)
Horizontal stabilizer and elevator surface 11.6 sqft (1.08 m
2
)
Aspect ratio 11.8
Positive flap deflection (down)
0°- position (0),
+15° - position (+1),
+25° - position (+2)
In flight Center of Gravity (MAC) 25% - 36%
Propeller - fixed pitch
Pipistrel FP02-80, dia. 65’’
1660 mm
General
Introduction
This manual contains all information needed for appropriate and safe use of ALPHA Trainer.
IT IS MANDATORY TO CAREFULLY STUDY THIS MANUAL BEFORE USING THE AIRCRAFT.
Pipistrel do.o. is not responsible for any damage or injury resulting from not following the instruc-
tions contained in this manual.
All text, design, layout and graphics are owned by Pipistrel d.o.o.. Therefore, this manual and any of
its contents may not be copied or distributed in any manner (electronic, web or printed) without the
prior consent of Pipistrel d.o.o. unless they are directly related to the operation of our aircraft by an
owner or his appointed maintenance authority.
1-2