Page 7<&(%$*4.8"4,7%K'*#$"&8#L%/7*,#*%4,77%HMNNNMNIIMOPQP1Item 63397
?@<6ARST6;@ACSED@CEA6E@EU6 ?6AFT
G&)*("83
1. Carefully remove all tools, parts, etc.
from under the lift.
2. First raise the Lift slightly by pumping the Handle
to relieve pressure on the Height Lock Bar. Lift
Height Lock Handle out of locked position.
3. Turn the Handle counterclockwise slowly in
extremely small increments. Never allow the load
to come down quickly or suddenly. Have another
person balance the vehicle during this process.
4. Once the load is on the ground,
remove the tie-down straps.
Roll the Lift out from under the load.
5. Clean external surfaces of the Lift with
a clean, dry cloth. Turn the Handle completely
counterclockwise. Store the Lift in a dry,
indoor area out of reach of children.
To Next Page
Loading...
