Pittsburgh 63613 User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference. 17e
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2017 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Read this material before using this
product. Failure to do so can result in
serious injury. SAVE THIS MANUAL.

Pittsburgh 63613 Specifications

General

Brand	Pittsburgh
Model	63613
Category	Measuring Instruments
Language	English

Summary

Save This Manual

Important Safety Information

Keep Work Area Clean

Cluttered areas invite injuries. Keep work area well lighted. Always keep children out of work area.

Store Idle Equipment

When not in use, the Indicator must be stored in a dry location. Always lock up products and keep out of reach of children.

Use Right Product

Use the Indicator for its designed applications. Do not modify or use for unintended purposes.

Check For Damaged Parts

Before use, check for damaged parts. Ensure proper operation. Repair or replace damaged parts immediately.

Avoid Alcohol and Drugs

Do not operate under the influence of alcohol or drugs. Check prescriptions for impairment.

Use Eye Protection

Always wear ANSI-approved impact safety goggles.

Battery Strength

Battery strength will affect readings. Use fresh battery at all times.

Keep Out Of Reach

Contains button cell battery. Keep away from small children. Discard used batteries immediately.

Understand Limitations

Manual cannot cover all situations. Common sense and caution must be supplied by the operator.

Operating Instructions

Tool Handling

Do not bump or shock the tool. Rough treatment may damage the highly sensitive mechanism.

Testing Brake Rotors Example

Example use: testing brake rotors for true. Clean components first. Clamp Indicator correctly.

Powering On and Setting Zero

Push the "On/Off" Button to turn the meter ON. Push the Zero Button to set the dial to zero.

Measuring True

Spin the rotor by hand. The needle and display show the amount of difference in true.

Switching Units

Press the inch/mm Button to switch between inches or millimeters.

Replacing the Battery

Remove battery cover, replace battery with correct type, and replace cover. Dispose of old battery properly.

Limited 90 Day Warranty

Warranty Coverage

Product is free from defects in materials and workmanship for 90 days from purchase.

Warranty Exclusions

Does not apply to misuse, abuse, accidents, alterations, improper installation, wear, or lack of maintenance.

Liability Limitation

Not liable for death, injuries, or incidental/consequential damages. Some states may not allow limitations.

Returning Product for Warranty

Return product with prepaid transportation, proof of purchase, and complaint explanation.