Pittsburgh Laser Range Finder User Manual

Laser Range Finder
Item 67802
INSTRUCTIONS AND
PRECAUTIONS
Visit our website at:
http://www.harborfreight.com
Read this material before using
this product. Failure to do so
can result in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the
product is intact and undamaged.
If any parts are missing or broken,
please call 1‑800‑444‑3353
as soon as possible.
Copyright
©
2011 by Harbor Freight Tools
®
. All rights reserved. No portion of this document
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools. Diagrams within this document may not be
drawn proportionally. Due to continuing improvements, actual product may differ slightly from
the product described herein. Tools required for assembly and service may not be included.
For technical questions, please call 1‑800‑444‑3353.

Pittsburgh Laser Range Finder Specifications

General

Brand	Pittsburgh
Model	Laser Range Finder
Category	Measuring Instruments
Language	English

Summary

Important Safety Information

Optical Device Usage

Never attach or use any other form of optical device with this product. Use as intended only.

Modification Warning

Do not modify in any way as this may result in hazardous radiation exposure.

Toy Safety

This product is not a toy. Do not allow children to play with or near this item.

Pre-Use Inspection

Inspect before every use; do not use if parts are loose or damaged.

Label Maintenance

Maintain product labels and nameplates for important safety information.

Battery Installation / Replacement

Device Buttons and Operation

Read Button

MEM Input Button

MEM Recall Button

FT/M Button

Volume Calculation Mode

Area Calculation Mode

Addition Mode Button

Measurement Base Usage

Positioning the Measurement Base

Distance Measurement

Measurement Procedure

Place base against object, point at target, press READ. Continuous measurement by holding READ.

Measurement Path

Target Accuracy

Addition

Addition Procedure

Take measurements and press '+/=' to add them sequentially. Units cannot be mixed.

Memory Functions

Storing Measurements

Recalling Measurements

Area/Volume Calculation

Entering Calculation Mode

Press 'W' button for area or 'H' button for volume calculation mode.

Measurement Sequence

Measure Length (L), then Width (W). For volume, measure Height (H).

Displaying Results

Exiting Calculation Mode