Need help?Do you have a question about the Pittway NOTIFIER XP Series and is the answer not in the manual?
Details the inherent limitations of automatic fire alarm systems and reasons for potential failures.
Provides information regarding radio frequency energy and compliance with FCC rules.
Overview of the XP Series Transponder's capabilities and functions.
Lists the key features and capabilities of the XP Series Transponders.
Lists essential documents for a comprehensive understanding of the XP Series Transponder.
Details the minimum required components for the Basic Equipment Package.
Describes the various expansion modules available for the XP Transponder system.
Information on the APS-6R Auxiliary Power Supply and its applications.
Lists and describes optional components for the XP Transponder system.
Instructions for mounting the XP Transponder cabinet backbox.
Guidance on installing the CHS-4 chassis for XP Transponder modules.
Steps for installing the main power supply into the cabinet.
Detailed procedure for installing the XPP-1 module into the CHS-4 chassis.
Instructions for installing the AVPS-24/AVPS-24E Audio/Visual Power Supply.
Procedure for installing the APS-6R Auxiliary Power Supply.
Steps for installing the remaining XP Transponder modules into the CHS-4 chassis.
Details the MPS-24A/MPS-24AE Main Power Supply capabilities.
Details the MPS-24B/MPS-24BE Main Power Supply capabilities.
Information on Audio Amplifiers for voice alarm applications.
Details the AVPS-24/AVPS-24E Audio/Visual Power Supply.
Comprehensive details on the MPS-24A/MPS-24AE Main Power Supply.
Description of the optional MPM-2 Main Power Meter.
Comprehensive details on the MPS-24B/MPS-24BE Main Power Supply.
Details the MPS-400 Main Power Supply for AFP-300/AFP-400 systems.
Information on the APS-6R Auxiliary Power Supply.
Details the configuration and wiring of the XPP-1 Processor module.
Wiring instructions for the XPM-8 Module with Style B Initiating Device Circuits.
Wiring instructions for the XPM-8 Module with Style D Initiating Device Circuits.
Wiring instructions for the XPM-8L Module with Style B Initiating Device Circuits.
Wiring instructions for the XPC-8 Module with Style Y Notification Appliance Circuits.
Wiring instructions for the XPC-8 Module with Style Z Notification Appliance Circuits.
Guidance on supplying power to Style Y XPC-8 circuits.
Wiring and configuration for the XPR-8 Module with Eight Form-C Relays.
Wiring and configuration for the XPR-8 Module with Four Dual Form-C Relays.
Internal connection of relay contacts for multi-channel voice alarm applications.
Diagram illustrating typical XP Transponder cabinet wiring.
Notes and considerations for XP Transponder cabinet wiring.
Enables dual-stage operation for Notification Appliance Circuits in Canada.
Installation and initialization of the XRAM-1 nonvolatile RAM chip.
Details on installing and initializing the XRAM-1 chip for custom operation.
Enabling and programming the Rapid All Call feature for audio systems.
Describes the normal operating state and indicator status.
Explains the indicators and behavior during an alarm condition.
Procedure for acknowledging active alarms on the Transponder.
How to perform a lamp test and system reset.
Details the yellow trouble LED and piezo sounder codes.
Procedure for acknowledging and clearing trouble conditions.
Minimum equipment and installation requirements per NFPA 72.
Requirements for auxiliary supervising station fire alarm systems.
Requirements for proprietary supervising station fire alarm systems.
Calculations for AC branch circuit current requirements.
Determining filtered power requirements for activated and inactive loads.
Calculating secondary power source requirements for batteries.
Lists and explains various trouble codes and their meanings.
General| Brand | Pittway |
|---|---|
| Model | NOTIFIER XP Series |
| Category | Marine Radio |
| Language | English |
To Next Page