Pittway NOTIFIER XPP-1

Need help?

Do you have a question about the Pittway NOTIFIER XPP-1 and is the answer not in the manual?

Summary

Section 3: XP Transponder Installation

Installing the Main Power Supply

Steps to install the main power supply unit.

Installing the XPP-1 into the CHS-4

Guide for installing the XPP-1 processor into the chassis.

Section 4: The Power Supplies

The MPS-24 A;MPS-24 AE Main Power Supply

Details about the MPS-24A/MPS-24AE power supply.

The MPS-24 B;MPS-24 BE Main Power Supply

Information on the MPS-24B/MPS-24BE power supply.

Section 5: Field Wiring the XP Transponder

The XPP-1 Processor

Wiring instructions for the XPP-1 processor module.

The XPM-8 Module (Style B)

Wiring for the XPM-8 module using Style B device circuits.

The XPM-8 Module (Style D)

Wiring for the XPM-8 module using Style D device circuits.

The XPM-8 L Module (Style B Only)

Wiring for the XPM-8L module (Style B only).

The XPC-8 Module (Style Y)

Wiring for the XPC-8 module using Style Y circuits.

The XPC-8 Module (Style Z)

Wiring for the XPC-8 module using Style Z circuits.

The XPR-8 Module With Eight Form-C Relays

Wiring for the XPR-8 module with eight Form-C relays.

The XPR-8 Module With Four Dual Form-C Relays

Wiring for the XPR-8 module with four dual Form-C relays.

Typical XP Transponder Cabinet Wiring

Illustrates typical wiring within an XP Transponder cabinet.

Section 6: Programming the XP Transponder

Section 7: Operating the XP Transponder

Alarm Condition

How the system indicates an alarm condition.

Acknowledging Alarms

Trouble Condition

Acknowledging Troubles

Appendix D: Troubleshooting the XP Transponder

Trouble Codes