Pittway NOTIFIER XPC-8

Need help?

Do you have a question about the Pittway NOTIFIER XPC-8 and is the answer not in the manual?

Summary

Installation Precautions

General Installation and Safety Advice

Key precautions for safe and reliable installation, including power, static, wiring, and environmental factors.

Section 2: XP Transponder Inventory

XP Transponder Expansion Modules

XP Transponder Power Supplies

Details the different power supply options available for the XP Transponder system.

Section 3: XP Transponder Installation

Installing the Main Power Supply

Section 4: The Power Supplies

Section 5: Field Wiring the XP Transponder

The XPP-1 Processor

Details the XPP-1 module configuration and its connectors.

Setting DIP Switches for XP Transponder Functions

Guide to setting DIP switches for various XP Transponder functions.

Addressing XP Transponders and Modules

Explains address assignment logic and setting the base address.

XPM-8 Module Wiring (Style B & D)

XPC-8 Module Wiring (Style Y & Z)

XPR-8 Module With Form-C Relays

Section 7: Operating the XP Transponder

Acknowledging Troubles

Section 6: Programming the XP Transponder

Programming the XRAM-1 Chip

Details the XRAM-1 chip installation and initialization procedures.

Rapid All Call Activation Programming

Instructions for programming the Rapid All Call feature for audio systems.

Appendix A: NFPA Code-Specific Requirements

NFPA 72 Fire Alarm System Requirements

Covers NFPA 72 requirements for various fire alarm system types.

Appendix B: Power Supply Calculations

The AC Branch Circuit

The Filtered Supply

Secondary Power Source Requirements

Appendix C: AFP-300;AFP-400 Power Supply Calculations

Table 11 Filtered Power Requirements (Not Activated) @ 24 VDC

Table 12 Filtered Power Requirements (Activated) @ 24 VDC

Appendix D: Troubleshooting the XP Transponder

Trouble Codes

Lists and explains various trouble codes indicated by the XP Transponder.