Need help?Do you have a question about the Piusi Cube 90/44 and is the answer not in the manual?
General| Flow Rate | 90 l/min |
|---|---|
| Tank Capacity | 44 l |
| Power Supply | 230 V |
| Fluid | Diesel |
| Hose length | 4 m |
| Protection rating | IP55 |
| Accuracy | ±0.5% |
Safety warnings related to fire and explosion hazards when handling flammable fluids.
Warnings and precautions regarding the danger of electrocution and death from electric shock.
Warnings about operating the unit when fatigued, under influence, or modifying equipment.
Information on hot equipment surfaces and fluids to avoid severe burns.
Warnings about toxic fluids, MSDS, and protective gloves.
Comprehensive first aid guidelines for various exposure and shock incidents.
Advises overseeing the first priming phase and troubleshooting prolonged priming.
Procedure for checking and calibrating the meter accuracy before operation.
Steps for dispensing fluid into a calibrated container and adjusting the meter.
Detailed step-by-step instructions on how to dispense fuel from the CUBE unit.
Instructions for cleaning the pump filter, including access and cleaning methods.
Covers problems related to low flow rates and inaccurate meter readings.
To Next Page
