Need help?Do you have a question about the Piusi CUBE 70 MC and is the answer not in the manual?
Explains the meaning of warning symbols used throughout the manual.
Essential pre-installation checks before powering up the unit.
Guidelines to prevent ignition of flammable fluids and vapors.
Warnings and precautions related to electrical power supply and shock.
Consequences of improper operation and handling of the equipment.
Information on burn hazards and risks from toxic fluids or fumes.
Immediate actions to take in case of electric shock incidents.
Rules regarding smoking and open flames during operation.
Mandatory personal protective equipment for safe operation.
Refers to the instruction manual as necessary equipment.
Details physical specifications and weight of the equipment.
Checks and verification of items included in the equipment package.
Location of identification plates and decals on the machine.
Covers Body, Pumping Unit, Pulser Meter, Control System, and Nozzle.
Details Level Indicator (optional) and Display Cover.
Provides electrical and flow rate specifications for the dispenser.
Details the power requirements and consumption of the unit.
Specifies forbidden uses with flammable liquids and explosive environments.
Defines permissible operating temperature and humidity limits.
Specifies the type of fluid and its viscosity for safe operation.
Guidelines for optimal placement, including priming height and suction pipe length.
Methods for securely mounting the dispenser unit.
Instructions for connecting the suction and delivery lines.
Guidelines for safely connecting the dispenser to the power supply.
Importance of configuring the MC system for specific station requirements.
How to switch to manual mode for simplified startup without data recording.
Step-by-step procedure for priming the pump before first use.
Explains access via PIN code or electronic key for authorized users.
Step-by-step guide for dispensing fuel using the system.
Regular inspection and maintenance operations for optimal performance.
Procedure for changing fuses within the electronic board panel.
Possible causes and solutions for motor not turning or starting.
Troubleshooting for low or no flow conditions.
Addressing problems with meter accuracy and nozzle shutoff.
Guidelines for disposing of packing, metal parts, and electronic components.
To Next Page
General
