Need help?Do you have a question about the Piusi K900 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Inlet/Outlet | 1" BSP |
| Type | Flow Meter |
| Accuracy | ±0.5% after calibration |
| Operating Temperature | -10°C / +60°C |
| Model | Piusi K900 |
Avoid electrical contact with fluid; disconnect power before maintenance.
Procedures for eye/skin contact, inhalation, or ingestion of treated product.
Use appropriate protective equipment suited to operations and cleaning agents.
Verify package contents against specifications; contact supplier for any anomalies.
Details the two numerical registers and various indications displayed on the LCD screen.
Diagrams and notes for electrical connections of the K900 with optional components.
Describes the standard dispensing mode and display behavior after dispensing ends.
Details how to reset the partial register when the meter is in standby.
Defines "Calibration factor" or "K Factor" and "User K Factor".
Outlines why and how to calibrate the meter, mentioning two procedures.
Step-by-step guide for performing in-field calibration using the meter's buttons and display.
Explains how to select the main measurement unit for the meter.
Instructions for replacing the meter's batteries and low-battery alarm levels.
To Next Page
