Pixel Pawn - Delay Shoot Function

4）TX sends out shooting signals while fully pressed. At
the moment TX red light on and flashes but RX red
light on and blinks. The Camera starts to shoot.
5) Repress the RX release button, TX stops sending out
signals and RX stops sending out shooting signals
then the Camera stops shooting.
Delay shoot function:
1）Press“SET”button of transmitter,
and set the function as [ ] .
2）Set the Camera shooting mode as
[ ] .
3）Half press the TX shutter release
button for sending out focus signals,
both TX and RX green indicator
lights are on.The Camera is under
4) Fully press the TX shutter release button for sending
out shooting signals, TX red light on and flashes but
RX red light on and blinks. The Camera starts to
count time.
5) RX indicator light turns off and sends out shooting
signals to the Camera after finishing counting.
focus state till released or fully pressed.