Pixel Sail Boat - Getting Started

2
www sailpixel com
Getting Started
Unpacking and getting ready
When rigging your PIXEL for the first time, we recommend doing so when
it is secured on the trailer where you can easily walk around the boat and so
that someone can get in the boat to help step the mast. Make sure there are
no overhead power lines or other objects that the mast could get tangled in.
Remember that the mast measures 18 feet above the boat and allow plenty of
room for raising it
When you receive your new PIXEL, you will find the following:
1.)Hull, with the following attached:
Hiking Straps
Centerboard and Control Lines (Up & Down)
Capsize Recovery System
Locker covers and tail bags
2.) Mast (with spreaders, and halyards attached)
3.) Boom (with mainsail outhaul and boom vang attached)
4.) Sail Bag
Mainsail
Jib, with jib sheets and tack shackle attached
Spinnaker Pole
Tiller
Hiking Stick (Tiller extension)