Pixel Sail Boat - You will Need

3
www sailpixel com
5.) Spinnaker Turtle
Main Sheet
Tow Line
2 Spinnaker Sheets
Traveler Block
Spinnaker
6.) Rudder (with preventer line attached)
You Will Need
Tools
To rig your Pixel you will need the following:
Phillips head screwdriver
Electrical Tape
Knife or snips to cut wire ties
Knots
You will need to tie the following knots. If you need help, see
http://www.sailingusa.info/sailing_knots.htm
Figure 8
Bowline
NOTE: All lines with loose ends should be tied with a figure 8 knot prior to
sailing to prevent losing them.