20" LCD Color Monitor Planar PE2010
6
OPERATING INSTRUCTIONS (cont.)
• Auto Adjust button / Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY(EXIT OSD menu) or go back to the previous
menu.
2. When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.
• Power Indicator:
Green — Power On mode.
Amber — Standby mode.
• OSD-Lock Function:
Option 1: OSD lock - all 5 buttons are locked except the "POWER" button. Press and hold the "MENU" and "V" buttons
for 3 seconds to lock the buttons. Repeat this step to unlock.
Option 2: OSD & Power button lock - all 6 buttons including the
"POWER" button are locked. Press and hold the "MENU" and"∧" buttons for 3 seconds to lock all 6 buttons. Repeat
this step to unlock."
3.3 Adjust the Picture
To Next Page
Loading...
Need help?
General
