15
Care and Maintenance
Care
Avoid exposing your LED Monitor directly to sunlight or other heat source. Place your LED
Monitor away from the sun to reduce glare.
Put your LED Monitor in a well ventilated area.
Do not place any heavy things on top of your LED Monitor.
Make certain your LED Monitor is installed in a clean and moisture-free area.
Keep your LED Monitor away from magnets, motors, transformers, speakers, and TV sets.
Note
Move the LED out of the package and take off the plastic bag and Polystyrene Foam.
Pull the base from Parallel versus Panel to Vertical.
Adjust the Panel within 0(±2) degree leaning forward and 20(±2) degree leaning backward.
Safety Tips
If smoke, abnormal noise or odor came out from your LED Monitor, caution you should
remove the power cord immediately and call your service center.
Never remove the rear cover of your LED Monitor cabinet. The display unit inside contains
high-voltage parts and may cause electric shock to human bodies.
Never try to repair your
LED Monitor
yourself. Always call your service center or a qualified
technician to fix it.
Troubleshooting
No power
Make sure A/C power cord is securely connected to the power adapter and the power supply
is firmly connected to the
LED Monitor
.
Plug another electrical device into the power outlet to verify that the outlet is supplying
proper voltage.
Make sure all signal cables are installed.
Power on but no screen image
Make sure the video cable supplied with the
LED Monitor
is tightly secured to the video
output port on back of the computer. If not, tightly secure it.
Adjust brightness.
Wrong or abnormal colors
If any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
Connect the
LED Monitor
to another computer.
To Next Page
Loading...
Need help?
General
