Planar PLL1900MW - First Setup; Installing and Disconnecting the Stand Base

3
First Setup
Congratulations on your purchase of this high performance LED monitor.
This LED Monitor comes with the following accessories :
 LED Monitor  Power Cable
 User’s Guide  Audio Cable
 VGA Cable
Installing the Stand Base
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Install the stand base to the monitor.
Disconnecting the Stand Base
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Press the 2 tenons inwardly and pull the stand base to remove.