6
Quick Installation
1. Connect Video cable (VGA cable)
Make sure both monitor and computer are powered OFF. Connect the video cable (VGA
cable) to the computer, then to the monitor.
2. Connect Power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.
3. Connect Audio cable
Connect the Audio cable from Audio output of computer to the Audio input of the monitor.
4. Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.
5. Setting the Timing Mode
Recommended resolution and refresh rate is 1366 x 768 @ 60 Hz.
Example:
PC
Power cable
VGA cable Audio cable
To Next Page
Loading...
