Planar PLL1900W - First Setup; Stand Installation and Removal

3
First Setup
Congratulations on your purchase of this high performance edge lit LED LCD monitor.
This LED LCD monitor comes with the following accessories :
 LED LCD monitor  Power Cable
 User’s Guide  VGA Cable
Installing the Stand Base
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Install the stand base to the monitor.
Disconnecting the Stand Base
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Press the 2 tenons inwardly and pull the stand base to remove.