Planar PLL1900W User Manual

6
Quick Installation
1. Connect the VGA video cable from the monitor to the computer. Make sure both monitor
and computer are powered OFF.
2. Connect the power cord to a properly grounded AC outlet, then to the monitor.
3.
Power-ON computer and then POWER-ON the monitor.
Set the timing mode on your computer. Recommended resolution and refresh rate is
1366 x 768 @ 60 Hz.
Example:
PC
Power cable VGA cable

Planar PLL1900W Specifications

General

Brand	Planar
Model	PLL1900W
Category	Monitor
Language	English