7
Power Input Connections
Connect the ground terminal to the closest point on the chassis of the vehicle.
Keep this ground wire to less than 3 ft. (36”) in length.
Use a high quality OFC 8 gauge wire.
Connect the remote terminal to the remote output of the head unit to “REM” using
16 gauge wire.
Connect an empty fuse holder within 18” of the car battery, and run
8 gauge cable from this fuse to the amplifier location.
Then connect the fuse holder to the “+12V”
Subwoofer Level Control
Subwoofer Remote Control allows you raise to lower the level of the subwoofer
independently from the other two outputs channels.
To Next Page
Loading...
Need help?
General
