Planet FPS-5P-M User Manual

Page 74
• When the Spool Settings dialogue box appears, choose Start
printing after last page is spooled and click OK.
Problem No. 5 A printing device connected to the Print Server port cannot print or
prints garbage.
Solution No. 5 Check the following:
• Cable connection between Print Server and printer.
• Serial port configuration, if a serial device.
• Printer driver in the application program or Windows matches
the printer.
Problem No. 6 The Configuration button on the Printer Status screen in Bi-Admin is
grayed out, even though my printer is bi-directional.
Solution No. 6 The button is unavailable if the printer is busy. You must wait until
the printer is idle.

Planet FPS-5P-M Specifications

General

Brand	Planet
Model	FPS-5P-M
Category	Print Server
Language	English