Planet ICF-1700 - Basic Configuration; Quick Reference in CD-ROM Guide

1-3
English
Basic Conguration
A. LCD conguration access
The Media Phone can be managed through the touch screen, such as multi-
language or network feature, please follow the step to select the suitable language
and network setting as below.
1. Press [Settings] to enter the conguration menu.
2. Go to [Language] page, the default setting is English, use the key - up /
down to change the language setting. After setting nished, press Save to save
and activate the changes.
3. Go to [Network]  [WAN mode] to congure the network conguration.
4. Please congure the phone based on your network conguration: Static or DHCP.
When you on the static IP page, you can press up / down key to congure the
IP address, then press Save to save changes.
5. Go to [Accounts]  [Account1] to congure the SIP1 account conguration,
then check Account active.
B. Web conguration access
The Media Phone provides GUI (Web based, Graphical User Interface) for machine
management and administration.
The default IP address of media phone is 192.168.0.1. You may now open your
web browser, and insert http://192.168.0.1 in the address bar of your web
browser to logon Media Phone web conguration page.
Media phone will prompt for logon username/password, please enter: admin /
123 to continue machine administration.
Note
In order to connect the device for administration, please locate your
PC in the same network segment (192.168.0.x) of media phone. If
you’re not familiar with TCP/IP, please refer to related chapter in
user’s manual CD or consult your network administrator for proper
network congurations.
Quick reference in CD-ROM guide
This guide is used to help you startup your Internet Media Conferencing Phone
settings. It is also recommended to check the user manual CD-ROM for more
details.