Quick Installation Guide
- 20 - PLANET Technology Corp.2024
3. After entering the password, the main screen appears as Figure 5-6
shows.
Note:
The following web screen is based on the
IGS-4215-8P2T2S. The display of the other IGS-4215 PoE
series is the same as that of the IGS-4215-8P2T2S.
The following web screen is based on the firmware version of
February of 2024 or after.
4. When the following dialog box appears, please enter the default user
name and password. Refer to Section 4.1 to determine your initial
login password.
Default IP Address: 192.168.0.100
Default Username: admin
Default Password: sw + the last 6 characters of the MAC ID in
lowercase
5. Find the MAC ID on your device label. The default password is
"sw" or “mc” followed by the last six lowercase characters of the
MAC ID.
Figure 5-3: Industrial Managed Switch MAC ID Label
To Next Page
Loading...
