Need help?Do you have a question about the Planet IGS-5225-4P2S and is the answer not in the manual?
Lists the technical specifications for different models of the switch.
Describes the procedures for installing the switch and making network connections.
Details methods for managing the switch using Command Line Interface (CLI) via Telnet or console.
Explains how to manage the switch using its web-based interface via a browser.
Covers system-related administrative details, configuration, and viewing.
Allows configuration of IPv4/IPv6 interfaces and IP routes for the switch.
Explains how to configure NTP servers for synchronizing system clocks.
Explains the SNMP protocol and its components for network management.
Allows configuration of RMON alarm entries, including variables and thresholds.
Covers the configuration and management of the DHCP server functionality.
Covers configuration and management of switch ports, including settings and statistics.
Explains the concepts and configuration of Virtual Local Area Networks (VLANs).
Explains the Spanning Tree Protocol (STP) for preventing network loops and ensuring backup links.
Describes the loop protection function to prevent broadcast loops in the switch.
Details Quality of Service (QoS) features for controlling and prioritizing network traffic.
Details storm control configuration for unicast, multicast, and broadcast traffic.
Covers security features for managing access, authentication, and network protection.
Manages access to the switch, including access control lists and management statistics.
Controls access to the switch via user authentication using RADIUS or TACACS+.
Manages port security features, including limit control and violation modes.
Covers Access Control Lists (ACLs) for specifying traffic objects and access rights.
Explains DHCP Snooping to block untrusted ports and prevent bogus DHCP replies.
Provides a secure feature to restrict IP traffic based on DHCP Snooping Table or IP Source Bindings.
Explains ARP Inspection as a security feature to block ARP cache poisoning attacks.
Covers Power over Ethernet (PoE) features, including switch introduction and powered device types.
Details PoE system configuration, including power management and reserved power settings.
Allows configuration of PoE port settings like mode, schedule, priority, and power allocation.
Covers switch maintenance tasks like firmware upgrade and configuration management.
Facilitates updating the switch firmware via the web interface.
Allows resetting the switch configuration to factory defaults, retaining IP configuration.
Enables rebooting the device from a remote location via the web interface.
Provides physical and IP layer diagnostic tools for troubleshooting network issues.
General| Switch type | Managed |
|---|---|
| Switch layer | L2+ |
| Web-based management | Yes |
| Console port | RJ-45 |
| Power connector | Terminal block (3-pin) |
| SFP module slots quantity | 2 |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 4 |
| 10G support | No |
| Number of VLANs | 4094 |
| Routing entries | 32 |
| Networking standards | IEEE 1588v2, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1ag, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Virtual LAN features | MAC address-based VLAN, Multicast VLAN, Private VLAN, Protocol-based VLAN, Tagged VLAN, Voice VLAN |
| Total Power over Ethernet (PoE) budget | 144 W |
| Power over Ethernet (PoE) power per port | 36 W |
| Throughput | 8.928 Mpps |
| Jumbo frames | 9000 |
| MAC address table | 8000 entries |
| Packet buffer memory | 4 MB |
| Form factor | - |
| Certification | FCC Part 15 Class A, CE IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
| Product color | Blue |
| LED indicators | Activity, Fault, Link, PoE, Power, Ring |
| Housing material | Metal |
| International Protection (IP) code | IP40 |
| DC input voltage | 48 - 56 V |
| Power consumption (max) | 151.8 W |
| Heat dissipation | 520.82 BTU/h |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating temperature (T-T) | -40 - 75 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Security algorithms | SNMP, SNMPv3 |
| Queue scheduling algorithms | Priority queuing (PQ), Weighted Round Robin (WRR) |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 87.8 mm |
|---|---|
| Width | 50 mm |
| Height | 135 mm |
| Weight | 610 g |
To Next Page
