Need help?Do you have a question about the Planet IGS-5225-16T4S and is the answer not in the manual?
Provides step-by-step instructions for installing the switch on a desktop or in a rack.
Details how to manage the switch using Command Line Interface via Telnet or console port.
Explains how to access and use the web interface for switch configuration and management.
Covers system settings including information, IP configuration, users, and maintenance.
Covers port configuration, statistics, SFP module information, and port mirroring.
Explains how to group ports for increased bandwidth and redundancy using Static LAGs and LACP.
Covers VLAN overview, IEEE 802.1Q, private VLANs, port isolation, and various VLAN types.
Covers QoS understanding, port policing, classification, scheduler, shaping, and remarking.
Explains ACL status, configuration, ACE configuration, port configuration, and rate limiters.
Details IEEE 802.1X, MAC-based, and User Authentication methods.
Covers port limit control, access management, HTTPS/SSH, DHCP snooping, and ARP inspection.
Covers PoE powered devices, system configuration, PoE configuration, port sequential, and PoE status.
General| Model | IGS-5225-16T4S |
|---|---|
| Switching Capacity | 40Gbps |
| Forwarding Rate | 29.76Mpps |
| MAC Address Table | 8K |
| Jumbo Frame | 9KB |
| Type | Managed Switch |
| Ports | 16 x 10/100/1000BASE-T, 4x 100/1000BASE-X SFP |
| Switch Architecture | Store and Forward |
| Power Input | 100-240VAC, 50/60Hz |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% to 95% (non-condensing) |
To Next Page
