Need help?Do you have a question about the Planet IGS-4215-4P4T and is the answer not in the manual?
General| Switch Architecture | Store-and-Forward |
|---|---|
| Switching Capacity | 16 Gbps |
| Forwarding Rate | 11.9 Mpps |
| MAC Address Table | 8K |
| Jumbo Frame | 9KB |
| Humidity | 5% to 95% (non-condensing) |
| PoE Standard | IEEE 802.3af/at |
| PoE Power Budget | 120W |
| Power Supply | 100-240V AC, 50/60Hz |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40 to 70°C |
Ensure proper grounding to prevent damage from lightning and electrical surges.
Instructions for logging into the device via the console port using default credentials.
Procedure to display and modify the switch's IP address and subnet mask using the console.
Instructions on how to save the current running configuration to the startup configuration.
Steps to access the switch's web interface using a browser and default credentials.
Procedure to save current settings as startup configuration using the web interface.
To Next Page