Quick Installation Guide
- 15 - PLANET Technology Corp.2024
Note:
1. For security reason, please change and memorize the
new password after this first setup.
2. Only accept command in lowercase letter under console
interface.
4.2 Configuring IP Address via Console
The Industrial Managed PoE+ Switch is shipped with default IP address as
follows:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the
Industrial Managed PoE+ Switch, please use the procedures as follows:
Show the current IP address
1. At the “IGS-4215-8P2T2S#” prompt, enter “show ip”.
2. The screen displays the current IP address, subnet mask and
gateway as shown in Figure 4-4.
Figure 4-4: IP Information Screen
To Next Page
Loading...
