Quick Installation Guide
- 16 - PLANET Technology Corp.2024
Configuration of the IP Address
3. At the “IGS-4215-8P2T2S #” prompt, enter “configure”.
4. At the “IGS-4215-8P2T2S (config)#” prompt, enter the following
command and press <Enter> as shown in Figure 4-5.
IGS-4215-8P2T2S (config)# ip address 192.168.1.100 mask
255.255.255.0
IGS-4215-8P2T2S (config)# ip default-gateway 192.168.1.254
The previous command would apply the following settings for the
Industrial Managed PoE+ Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 4-5: IP Address Screen
5. Repeat Step 1 to check if the IP address has changed.
If the IP is successfully configured, the Industrial Managed PoE+ Switch
will apply the new IP address setting immediately. You can access the
Web interface of the Industrial Managed PoE+ Switch through the new IP
address.
To Next Page
Loading...
