Quick Installation Guide
- 12 - PLANET Technology Corp.2024
4.1 Logging on to the Console
Once the terminal is connected to the device, power on the Industrial
Managed PoE+ Switch and the terminal will display “running testing
procedures”. Then, the following message asks to log in user name and
password. The factory default user name and password are shown as
follows, and the login screen in Figure 4-3 appears.
Note:
The following console screen is based on the
IGS-4215-8P2T2S. The display of the other IGS-4215 PoE
Series is the same as that of the IGS-4215-8P2T2S.
Then, the following message asks to log in user name and
password. The factory default user name and password are shown
as follows as the login screen in Figure 4-1 appears.
The following console screen is based on the firmware
version before February of 2024.
User Name: admin
Password: admin
Figure 4-3: Industrial Managed PoE+ Switch Console Login Screen
To Next Page
Loading...
