Need help?Do you have a question about the Planet IGS-1020TF and is the answer not in the manual?
Details the physical dimensions of the IGS-1020TF Industrial Gigabit Ethernet Switch, including W x D x H.
Describes the front panel layout, including RJ45 ports, SFP slots, and LED indicators.
Explains the meaning of system and port LEDs (P1, P2, FAULT, LNK/ACT) for status indication.
Details the upper panel of the switch, focusing on the terminal block connector and power inputs.
Provides instructions on how to connect DC power wires to the terminal block connector for redundant power inputs.
Explains how to wire the fault alarm contacts on the terminal block connector for fault status detection.
Lists the detailed hardware specifications, including ports, fabric, throughput, and MAC table.
Guides the user through the process of mounting the switch onto a DIN rail.
Provides instructions for installing the switch on a wall using the wall-mount plate.
Details the procedure for inserting SFP transceivers into the SFP slots for fiber optic connections.
Explains the correct steps to safely remove an SFP transceiver module from the switch.
Details the pin assignments for the switch's RJ45 ports for 1000Mbps and 10/100Mbps connections.
Explains the color coding and pin allocation for standard UTP/STP straight-through and crossover cables.
Lists the fiber types and cable specifications for 100FX and 1000X fiber optic cables.
To Next Page
General