Planet NVR-820 Quick Installation Guide

5
Rear Panel
Ethernet
Power
VGA
HDMI
Audio Input / Output
Microphone Input
LED Status Denitions
Power
Green
Solid green indicates normal operation. Slow blinking in
green after pressing and holding the reset button for 5
seconds indicates the device will enter the restore default
process. Other LEDs remain unchanged during this state.
Red System off (with power cord still plugged in)
Amber
Fast blinking in amber indicates the system is initializing/
starting. Continuous blinking indicates the system is unable
to start properly (All other LEDs should be off when this
LED is blinking in amber). Slow blinking indicates the
system is shutting down.
Buttons Status Denitions
Power
On Press and hold for 2 seconds
Off Press and hold for 2 seconds
Reset
Restore
default
Press and hold for 5 seconds
Restart Press and hold for 2 seconds
Buzzer Status Denitions
Beep
Complete
start
Beeping once indicates the system is fully started.
Initiating
restart
Beeping once indicates the restart process has begun.
Initiating
shutdown
It beeps once during the shutdown process after releasing
the power button.

Planet NVR-820 Specifications

General

Brand	Planet
Model	NVR-820
Category	Network Hardware
Language	English