Planet NVR-400 User Manual

4-CH Network Video Recorder
NVR-400
User’s Manual
Version: 1.1
Date: April, 2009

Planet NVR-400 Specifications

General

Model	NVR-400
Video Input Channels	4
USB Ports	2
Operating System	Embedded Linux
Video Output	1x HDMI, 1x VGA
Recording Resolution	1080p
Max HDD Capacity	6TB
Network Interface	1x RJ-45 10/100/1000 Mbps
USB Interface	USB 2.0
Power Supply	12V DC
Operating Temperature	0°C to 40°C

Summary

4-CH Network Video Recorder User's Manual

Chapter 2 Hardware Installation

Installing the Hard Disk Drive

Connecting Network and Power

Chapter 3 Accessing the Device

Accessing the NVR via My Network Places

Using the IPFinder Utility

Chapter 4 Configuring the Device

Setup Wizard for Initial Configuration

Step-by-step wizard for initial network and system setup.

Web Configuration Utility Overview

Introduces the web interface for advanced device settings and navigation.

System Information and Status

System Settings: LAN, Time, Notification

Configures network interface, system time, and email notification preferences.

System Settings: Configuration and Firmware

Storage Setup and Disk Management

Configures storage space, RAID settings, and manages installed hard drives.

USB Disk and Shared Folder Setup

Authorization Setup: Users and Groups

Manages user accounts, groups, and sets access permissions for the NVR.

Network Service Configuration

Configures network services like FTP, UPnP Media Server, and iTunes Server.

NVR Configuration: IP Camera and Quad View

Sets up IP camera connections, recording schedules, and live multi-camera viewing.

Motion Detection Configuration Examples

Setting Motion Detection with ICA-530

Motion Detection for ICA-M220 with FTP