Planet NVR-400 User Manual

3.2 Using IPFinder
The device comes with a conveniently utility, IPFinder, which is included in the Installation
CD-ROM, allowing you to search the device on your network easily.
1. Insert the bundled CD-ROM into your computer’s CD-ROM Drive to initiate the Auto-
Run program.
2. Click the IPFinder item to launch the utility. The control panel will appear as below.
Display the connected device(s).
Double click to link the device.
Click About to get the Version information of IPFinder.
Click Link to connect the selected device.
Click Change IP to modify the IP address of the selected device.
Click Search to find the IP address of the connected device(s).
Click Exit to close the utility.
3. Once you get the IP address of the device, launch the Web browser to access your
device.
NVR-400 User Guide
- 11 -

Planet NVR-400 Specifications

General

Brand	Planet
Model	NVR-400
Category	Network Hardware
Language	English