Planet PAX A80 - Viewing Software Version

PAX A80 Setup and User Guide
weareplanet.com
15
6. Viewing software version
1. To view the Software version on your terminal you will need to enter the IntegraTE_Pax menu, you
will need to press and hold the ‘Planet' icon at the top of the screen.
2. When “Please Enter Password” is displayed, enter password and press the green Enter button.
3. Select “Config/Configuration”.
4. Then, select “Info”.
5. The relevant software version will be displayed, along with the Terminal ID and Hardware ID
1
2
3
4