Step 6: If you establish the connection successfully, you can see “Æ” when
type “enter”
Step 7: Input resetPasswd, then the hyper terminal will show the DVR
serial number and current date, it will indicate you to input valid number.
Step 8: Send the serial and date which show in the hyper terminal to us
(recommend you capture a picture of the hyper terminal like above). And,
we will send you the secure code based on the serial number and date.
Step 9: Input secure code and press “enter” to set the password to default.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei,
Taiwan, R.O.C.
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Web site: http://www.planet.com.tw
3
Planet reserves the right to change specifications without
prior notice.
All brand names and trademarks are property of their
respective owners.
Copyright (c) 2010 PLANET Technology Corp. All rights
reserved
To Previous Page
Loading...
