Planet USER MANUAL User Manual

Q&A_How to reset DVR-1650 if forget the password?
Step 1: Use RS232 series cable to connect the PC with DVR (you can find the
cable in accessory box).
Step 2: Enter into hyper terminal start menu Æ All programs Æ Accessories
Æ Communication Æ Hyper terminal.
Step 3: Input a name as you wish, select an icon as you wish.
Step 4: Select the COM number you are using.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei,
Taiwan, R.O.C.
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Web site: http://www.planet.com.tw
1
Planet reserves the right to change specifications without
prior notice.
All brand names and trademarks are property of their
respective owners.
Copyright (c) 2010 PLANET Technology Corp. All rights
reserved

Planet USER MANUAL Specifications

General

Brand	Planet
Model	USER MANUAL
Category	DVR
Language	English

Summary

How to Reset DVR-1650 Password

Connect PC to DVR and Access Hyper Terminal

Connect PC to DVR via RS232 cable and launch Hyper Terminal application.

Configure Hyper Terminal Connection Settings

Set up connection name, icon, and select the appropriate COM port for the DVR.

Set Hyper Terminal Port Properties

Configure COM port settings in Hyper Terminal: Bits per second, Data bits, Parity, Stop bits, and Flow control.

Initiate Password Reset Command

Type 'resetPasswd' in Hyper Terminal to start the DVR password reset process.

Obtain and Input Secure Code

Send DVR serial number and date to obtain a secure code, then input it to reset the password.