EasyManua.ls Logo

Planet WDAP-C3000AX - Page 64

Planet WDAP-C3000AX
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Manual of WDAP-C3000AX, WDAP-3000AX, WDAP-W3000AX
- 64 -
Figure 4-28: WAN
Object
Description
WAN Access Type
Please select the corresponding WAN Access Type for the Internet,
and fill out the correct parameters from your local ISP in the fields
which appear below.
Static
Select Static IP Address if all the Internet ports’ IP
information is provided to you by your ISP (Internet
Service Provider). You will need to enter the IP
address, Netmask, Gateway, and DNS Server provided
to you by your ISP.
Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by
a dot (x.x.x.x). The router will not accept the IP address
if it is not in this format.
IP Address
Enter the IP address assigned by your ISP.
Netmask
Enter the Subnet Mask assigned by your ISP.
Gateway

Table of Contents

Other manuals for Planet WDAP-C3000AX

Related product manuals