Need help?Do you have a question about the Planet WNAP-6325 and is the answer not in the manual?
General| Maximum Data Rate | 300 Mbps |
|---|---|
| Frequency Bands | 2.4 GHz / 5 GHz |
| Antenna Gain | 5 dBi |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Power over Ethernet (PoE) | 802.3af |
| Security | WEP, WPA, WPA2 |
| Operating Modes | Access Point, Client, WDS, Repeater |
| Humidity | 5~95% RH, Non-condensing |
Provides detailed technical specifications for hardware, software, and standards.
Lists critical safety measures to follow during AP installation.
Details crucial precautions for installation, including surge protection and cable usage.
Provides essential safety warnings specifically for outdoor AP installation.
Guides on manually configuring TCP/IP settings on a PC for AP setup.
Details the process of setting a static IP address on a computer for AP access.
Explains how to test network connectivity using the ping command.
Guides on accessing and initiating the AP setup through the web interface.
Allows selection and configuration of different operating modes for the WNAP-6325.
Configuration steps for operating the device as an Access Point.
Configuration steps for operating the device as a wireless client.
Configuration steps for operating the device as a WDS Access Point.
Guides on configuring wireless encryption and authentication methods.
Configuration options for advanced wireless network parameters.
Configuration of internet connection settings for WAN port.
Manages system-wide settings including IP, time, password, and upgrades.
Troubleshooting steps when the AP is unresponsive to web browser access.
Troubleshooting steps for issues preventing internet connectivity.
Step-by-step guide for setting up an AP client connection.
Detailed instructions for configuring a WDS (Wireless Distribution System) connection.
To Next Page
