Need help?Do you have a question about the Planet WAP-8000 and is the answer not in the manual?
The PLANET WAP-8000 is an outdoor 802.11a/b/g Wireless LAN Outdoor Access Point designed for robust wireless connectivity in various environments. This device is built to provide reliable network access and is suitable for outdoor installations due to its protective features.
The WAP-8000 serves as a versatile wireless access point, supporting IEEE 802.11a/b/g dual standards, which allows it to operate across different wireless frequencies and protocols. It functions as a central hub for wireless devices, enabling them to connect to a wired network. The device supports multiple wireless access modes, including AP (Access Point), AP Client, Bridge, and WISP (Wireless Internet Service Provider), offering flexibility in network deployment. In AP mode, it allows wireless clients to connect to the network. As an AP Client, it can connect to another access point as a client. In Bridge mode, it can connect two separate wired networks wirelessly. The WISP mode allows it to act as a client to an ISP's wireless network while also providing local wireless access.
The WAP-8000 is equipped with a 10/100BaseTX LAN port with Auto-MDI/MDIX, facilitating easy integration into existing wired networks. It supports Power over Ethernet (PoE) design, which simplifies installation by allowing both power and data to be transmitted over a single Ethernet cable, reducing the need for separate power outlets at the installation site. This is particularly beneficial for outdoor deployments where power sources might be scarce.
For enhanced security, the device supports various encryption methods, including WEP 64/128, WPA-PSK, and WPA2-PSK Authentication, ensuring that wireless communications are protected from unauthorized access. It also features MAC filtering, allowing administrators to control which devices can connect to the network based on their unique MAC addresses.
The WAP-8000 is designed to handle high data rates, supporting up to 54Mbps in standard 802.11a/g modes and up to 108Mbps with its Super A/G mode, which is beneficial for applications requiring higher bandwidth. Its high output power, up to 400mW, with multiple adjustable transmit power controls, allows for extended wireless coverage and signal strength, making it suitable for larger outdoor areas.
The WAP-8000 is designed for straightforward installation and management. The package includes essential accessories such as a PoE Injector, power adapter, mounting kit, and a waterproof connector, ensuring that users have everything needed for a typical outdoor setup. The N-type antenna connector allows for various antenna installations, providing flexibility to optimize wireless coverage and directionality.
The device's web-based configuration interface provides a user-friendly graphical interface for managing all its functions. Users can access this interface via a web browser by entering the device's IP address (default is http://192.168.1.1). The interface allows for easy setup of wireless settings, including SSID, frequency band, channel selection, and encryption. It also provides options for configuring IP settings, such as DHCP client or static IP address assignment, and IP alias settings.
For specific outdoor deployments, the "Distance" setting can be adjusted to optimize performance for point-to-point or point-to-multipoint links, accommodating varying link distances up to 50,000 meters. The device also includes a DHCP server function, which can be configured when operating in CPE router (WISP) mode, allowing it to assign IP addresses to connected clients.
Security features are easily configurable through the web interface. Users can set up access control based on MAC addresses, allowing specific clients to be accepted or denied access. SNMP (Simple Network Management Protocol) settings are also available for network management and monitoring purposes. The password for the web interface can be changed to enhance security.
The WAP-8000 is built to withstand rigorous weather conditions, making it ideal for outdoor use. Its wide operating temperature range ensures reliable performance in both lower and higher environmental temperatures. The IP68 rating indicates strong protection against dust and water ingress, although proper installation with well-tightened connectors and SFTP cables is crucial to maintain this protection.
The WAP-8000 includes several features to facilitate maintenance and ensure long-term reliability. The web interface provides a "Status" page that displays essential system information, including hostname, country code, uptime, firmware version, MAC addresses for both wireless and wired interfaces, and device temperature. This allows administrators to quickly monitor the device's operational status.
Firmware upgrades can be easily performed through the web interface, allowing users to keep the device updated with the latest features and security patches. The process is guided step-by-step, ensuring a smooth upgrade experience.
For configuration management, the device offers backup and restore functionalities. Users can save the current configuration file and restore it later, which is useful for quick recovery or deploying consistent settings across multiple devices. Additionally, there is an option to restore the device to factory default settings, either through the web interface or by using the physical reset button on the device.
The "Device Reboot" function allows administrators to remotely restart the WAP-8000 via the web interface, which can be helpful for troubleshooting or applying certain configuration changes.
Bandwidth control settings are available in AP Client mode, allowing users to limit the total upload or download stream, which can be useful for managing network resources.
Localization settings include NTP (Network Time Protocol) configuration to synchronize the device's clock with network time servers, ensuring accurate timekeeping for logging and other time-sensitive operations. Country code settings allow the device to comply with local regulatory restrictions on RF output power and available channels, which is important for legal and optimal operation in different regions.
The device's robust design, including its IP68 rating and wide temperature tolerance, minimizes the need for frequent physical maintenance in outdoor environments. However, it is strongly recommended to use SFTP (Shielded Foiled Twisted Pair) cables, especially when exposed outdoors, to provide better protection for data transmission and to guard against thunder strokes. Adhering to safety precautions during installation, such as avoiding power lines and ensuring proper grounding, is paramount for both device longevity and personnel safety.
General| Model | WAP-8000 |
|---|---|
| Security | WEP, WPA, WPA2, WPA3 |
| Wireless Standards | IEEE 802.11a/b/g/n |
| Frequency Bands | 2.4GHz, 5GHz |
| Ports | 1 x 10/100/1000Mbps Ethernet (RJ-45) |
| Antenna Type | Internal |
| Mounting Options | Ceiling, Wall |
| Operating Mode | Repeater, WDS |
To Next Page
