Need help?Do you have a question about the Planet WAP-252N and is the answer not in the manual?
Details IEEE standards, router functions, RF characteristics, and security.
Comprehensive technical details including wireless, hardware, and environmental specs.
Critical safety warnings and step-by-step mounting instructions.
Lists setup requirements and guides manual TCP/IP configuration.
Instructions on accessing and logging into the AP's web interface.
Introduces the wizard and outlines various operation modes (Gateway, Repeater, WISP, AP, WDS).
Explains how to set up the AP to extend wireless network coverage.
Details configuring the AP to act as a client for a Wireless Internet Service Provider.
Describes Point-to-Point and Point-to-Multipoint WDS bridging.
Configuring WLAN status, SSID, broadcast, WMM, bandwidth, channel, and encryption.
Setting up virtual APs and managing MAC access control.
Options for MAC filtering: All, Allow Listed, or Deny Listed.
Configuring region, mode, power, packet threshold, beacon, and users.
Setting up LAN IP, DHCP, and IP-MAC binding.
Explains PPPoE setup with username and password.
Configuring MAC clone, web server access, UPnP, and VPN passthrough.
Setting up filtering rules for IP, ports, MAC addresses, and URLs.
Configuring MAC address filtering rules.
Setting up rules to forward external ports to internal ports.
Configuring bandwidth limits for upload and download.
Instructions for upgrading the device's firmware.
Step-by-step guides for connecting via Windows XP and Windows 7.
Guide to connect to the wireless network using Windows 7.
Instructions for connecting to the wireless network on Mac OS X.
Solutions for unresponsive AP and internet connection problems.
Details IEEE standards, router functions, RF characteristics, and security.
Comprehensive technical details including wireless, hardware, and environmental specs.
Critical safety warnings and step-by-step mounting instructions.
Lists setup requirements and guides manual TCP/IP configuration.
Instructions on accessing and logging into the AP's web interface.
Introduces the wizard and outlines various operation modes (Gateway, Repeater, WISP, AP, WDS).
Explains how to set up the AP to extend wireless network coverage.
Details configuring the AP to act as a client for a Wireless Internet Service Provider.
Describes Point-to-Point and Point-to-Multipoint WDS bridging.
Configuring WLAN status, SSID, broadcast, WMM, bandwidth, channel, and encryption.
Setting up virtual APs and managing MAC access control.
Options for MAC filtering: All, Allow Listed, or Deny Listed.
Configuring region, mode, power, packet threshold, beacon, and users.
Setting up LAN IP, DHCP, and IP-MAC binding.
Explains PPPoE setup with username and password.
Configuring MAC clone, web server access, UPnP, and VPN passthrough.
Setting up filtering rules for IP, ports, MAC addresses, and URLs.
Configuring MAC address filtering rules.
Setting up rules to forward external ports to internal ports.
Configuring bandwidth limits for upload and download.
Instructions for upgrading the device's firmware.
Step-by-step guides for connecting via Windows XP and Windows 7.
Guide to connect to the wireless network using Windows 7.
Instructions for connecting to the wireless network on Mac OS X.
Solutions for unresponsive AP and internet connection problems.
General| Brand | Planet |
|---|---|
| Model | WAP-252N |
| Category | Wireless Access Point |
| Language | English |
To Next Page
