User Manual of WAP-252N/WAP-552N
-33-
Figure 5-15 Super WDS Mode
The page includes the following fields:
Object Description
SSID
It is the wireless network name. The default SSID is “PLANET_2.4G”
or “PLANET_5G”
Bandwidth Select the operating channel width, “20MHz” or “40MHz”
Channel
Select the operating channel you would like to use. The channel
range will be changed by selecting a different domain.
MAC
Enter the MAC address of slave AP
Encryption Select the wireless encryption. The default is “None”
AP Name
Enter the name of AP
AP Location
Enter the location of AP
AP1 enters the MAC address of AP2. And AP2 enters the MAC address of AP1. Then select the same Channel
to establish the connection.
To Next Page
Loading...
