Planet WAP-252N - Network Configuration; LAN Settings and IP-MAC Binding

User Manual of WAP-252N/WAP-552N
-44-
5.7.3 Network
5.7.3.1. LAN Settings
Figure 5-28 LAN Settings
Figure 5-29 IP-MAC Bind
The page includes the following fields:
Object Description
IP
Enter an IP address of LAN.
Subnet Mask
Enter a subnet mask of LAN.
DHCP Status Select ON or OFF to enable or disable DHCP server.
DHCP Client IP Start
Enter the starting IP address for the DHCP server’s IP assignment.
DHCP Client IP End
Enter the ending IP address for the DHCP server’s IP assignment.
Lease Time (hour)
Select the time for using one assigned IP from the DHCP server. After
the lease time, the AP automatically assigns new IP addresses to all
connected clients.
Add
Press to add the IP and MAC address.
Scan
Scan the client list.
Clear
Delete the IP and MAC address that you select.