Why is my Planet Wireless Access Point password wrong?
If you can't log into the web management interface of your Planet Wireless Access Point because the password seems wrong: * Ensure you're connecting to the correct IP address of the Access Point. * Remember that passwords are case-sensitive. Check if the 'Caps Lock' light is on. * If you've truly forgotten the password, perform a hard reset.
Why can't I find my Planet Wireless Access Point?
If you can't locate your Planet Wireless Access Point with your wireless device: * Check if ‘Broadcast ESSID’ is set to off. * Make sure both antennas are properly secured. * Try moving closer to the Access Point. * If ESSID broadcast is disabled, remember to manually input the ESSID on your wireless client.
Why are downloads so slow on my Planet Wireless Access Point?
If file downloading is very slow or frequently interrupted when using your Planet Wireless Access Point: * If you're using the QoS function, try disabling it and see if that improves the situation. * Internet speeds can fluctuate; please be patient. * Try resetting the Access Point to see if it improves performance. * Check the network activity of other computers on your local network. Large file transfers by others can impact your download speeds. * Contact your Internet service provider to inquire about any network issues if this is a new problem.
Is it normal for Planet WNAP-W2200 Wireless Access Point to be hot?
If your Planet Wireless Access Point becomes hot, here's what to consider: * It's generally not a malfunction if you can still comfortably touch the Access Point's case. * However, if you notice a burning smell or smoke coming from the Access Point or its power adapter, immediately disconnect both from the power supply (ensure it's safe to do so) and contact your dealer for assistance.
What to do if Planet WNAP-W2200 won't connect to the internet?
If you can't get connected to the Internet using your Planet Wireless Access Point, here are some things you can try: 1. Check the Internet connection status in the ‘Status’ -> ‘Internet Connection’ menu. 2. Sometimes the Internet is just slow, so be patient. 3. If you were able to connect a computer directly to the Internet before, try doing that again to see if the computer can connect when directly attached to the device provided by your Internet service provider. 4. Double-check your PPPoE / L2TP / PPTP user ID and password. 5. Contact your Internet service provider to check if there are any issues with their service. 6. If you can't connect to specific websites but other internet services work, check the URL/Keyword filter settings. 7. Try resetting the Planet Wireless Access ...
How to fix Planet WNAP-W2200 Wireless Access Point not responding?
If your Planet Wireless Access Point is not responding when you try to access it via a web browser, here are a few things to check: * Ensure the power cord and Ethernet cable are correctly and firmly inserted. * If all the LEDs are off, verify the power adapter is working correctly. * Make sure you are using the same IP address section as the Access Point. * If you are using MAC or IP address filtering, try connecting with another computer. If that doesn't work, reset the Access Point to factory default settings by pressing the reset button for over 10 seconds. * Set your computer to obtain an IP address automatically (DHCP) to see if it gets an IP address. * If the issue occurred after a firmware upgrade, contact your dealer for assistance. * If none of these steps work, co...
Provides a step-by-step guide for physical installation of the AP.
Guides users on accessing the AP's configuration utility via a web browser.
Guides connecting to a wireless network using Windows XP.
Guides connecting to a wireless network using Windows 7.
Guides connecting to a wireless network using Mac OS X.
Guides connecting to a wireless network using iOS devices.
General| Model | WNAP-W2200 |
|---|---|
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Storage Temperature | -20°C to 70°C |
| Ports | 1 x 10/100Mbps Ethernet Port |
| Power over Ethernet | 802.3af PoE |
| Antenna Type | Internal |
| Antenna Gain | 3 dBi |
| Security | WEP, WPA, WPA2 |
| Operating Modes | Access Point, WDS |
| Power Supply | 12V DC, 1A |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% (non-condensing) |
To Next Page
