User Manual of WNAP-W2200
-40-
Figure 5-22 Backup & Restore
The page includes the following fields:
Object Description
Backup:
Once you have configured the device the way you want, you can save
these settings to a configuration file on your local hard drive that can
later be imported to your device in case that the device is restored to
factory default settings.
To do this, click the “Backup” button and specify a directory to save
settings on your local hardware.
Restore:
Click the "Choose File" button to locate and select a configuration file
that is saved previously to your local hard drive. And then click the
"Restore" button to reset your device to previous settings.
Restore to Factory Default
This section is to reset all configurations to the default values. It means the device will lose all the settings you
have set.
Figure 5-23 Restore to Factory Default
To Next Page
Loading...
Need help?
General
