User Manual of WNAP-W2200
-39-
Figure 5-21 Log Setup
The page includes the following fields:
Object Description
Number of Logs:
Set the number of logs. Default is 200.
Log Server IP:
Enter the log server IP.
Log Server Port:
Enter the log server port.
5.6.4 Backup Settings
This section allows you to back up the current settings or to restore the previous settings configured on the
device.
Choose menu “Tools Backup Settings” to back up or restore the configuration of the WNAP-W2200.
Once you have configured the Wireless AP the way you want it, you can save these settings to a configuration
file on your local hard drive that can later be imported to your wireless AP in case the device is restored to
factory default settings.
Backup & Restore
To Next Page
Loading...
