Planet WNAP-6325 User Manual

User Manual of WNAP-6325
-29-
Figure 5-3 Basic Settings - AP
Object Description
 Regulatory Domain
Select your domain from the list.
 Network SSID
It is the wireless network name. The default SSID is
WNAP-6325.
 Site Survey
Click “Site Survey” to check the signal of remote sites.
 Enable Wireless
Check it to enable Wireless function.
 Disable SSID Broadcasting
Check it to disable SSID broadcasting.
Enable Isolated
Check it to isolate each connected wireless clients so that they
cannot access each other.
Radio Mode
Select the channel width to “Auto Select”, “2G 11NG HT20” or
“2G 11NG HT40”
 Channel
Select the operating channel you would like to use. The channel
range will be changed by selecting a different domain.
 Data Rate
Select MCS0~15 or Auto from the pull-down menu. The default is
“Auto”.
 Security Setting
Press “Setup” for more configurations. Please refer to 5.1.7
Security Setting for more information.
 Transmit Power
The range of transmit power is “12~27 dbm”. In case of
shortening the distance and the coverage of the wireless

Planet WNAP-6325 Specifications

General

Brand	Planet
Model	WNAP-6325
Category	Wireless Access Point
Language	English